SERVICES

Construction Machinery Rental Services in Johor

From earthworks to heavy machinery logistics, we provide reliable equipment and experienced operators to keep your project moving.

Safely | Efficiently | On Schedule
✓Since 2013✓CIDB / JPJ / NIOSH Certified Operators✓24H Mobilisation✓Fully Insured
Machinery Rental Johor

Operated Machinery, Delivered to Your Site

Green City Machinery rents operated excavators from 3 to 40 tonnes, backhoe loaders, 10-tyre lorry tippers and low loader transport across Johor. Our machines work on data centre, TNB, fibre and site clearing jobs, from Iskandar Puteri and Gelang Patah to Sedenak Tech Park, Senai and Johor Bahru. Every machine is supplied with a CIDB-registered, JPJ and NIOSH-licensed operator, and we mobilise within 24 hours of confirmation.

What we work on

The Jobs We Run in Johor

Four kinds of work make up most of our fleet's time, and each one asks something different of the machine and the operator.

Two Green City Machinery backhoe loaders working together on a data centre site in Gelang Patah, Johor
GELANG PATAH
Data Centre Earthwork

Bulk excavation, platform levelling and trimming along installed pile lines. These sites run to a fixed programme, and we work weekends when the programme demands it.

Green City Machinery Hitachi excavator on TNB transmission line earthwork beside live overhead lines in Johor
GELANG PATAH
TNB Infrastructure

Earthwork on TNB-related works beside live transmission lines, run to the access windows and the safety requirements the job carries.

Green City Machinery Kobelco excavator trenching along a road reserve and loading a lorry tipper for underground services in Johor
JOHOR
Fibre and Underground Services

Trenching along road reserves and live carriageways, where the corridor is narrow, traffic stays open beside you and reinstatement matters.

Green City Machinery excavator on open earthwork and site clearing ground at Iskandar Puteri, Johor
ISKANDAR PUTERI
Site Clearing and Handover

Clearing, grubbing and levelling before handover. Short duration work where the machine has to be in, finished and out.

How it works

How Renting From Us Works

Four steps, from the first message to off hire.

Step 1
Tell us the job

The machine or tonnage you have in mind, where the site is, how long you need it and the working hours. If you are not sure which machine the job needs, describe the work and we will tell you.

Step 2
We quote

We quote against the job, not off a price list. Every site has different access, hours and duration, so talk to us and we will work out the machine, the term and the rate that fits the work.

Step 3
Mobilisation

Machines move on our own low loaders, within 24 hours of confirmation. Access and offloading are coordinated with your site team before the machine leaves our yard.

Step 4
On hire and off hire

Monthly hires are billed monthly. Short jobs run on a daily rate. Late returns are charged per day at the agreed rate.

Rental terms

Monthly and Daily Rental Terms

How long you need the machine decides which rate applies.

1 month or longer
Monthly rate

Our standard hire. There is no three-month lock-in.

Under 1 month
Daily rate

Priced higher than the monthly equivalent.

Tell us how long the work runs and we will quote the term that fits it.
Green City Machinery team checking a machine before work starts on a data centre site in Kulai, Johor

Our Own Maintenance Team

Breakdowns on site are handled by our own technicians with our own resources. We are not waiting on a third-party workshop to get your machine running again.

Our fleet

Our Machines

Every machine below has its own page with working figures, site photos and the jobs it suits. Pick the one you need, or tell us the work and we will match it.

ON SITE

Recent Machinery Deployments in Johor

Real machines on real sites. Each one has a full write-up on its own project page.

TANJUNG LANGSAT, JOHOR12-ton excavator levelling ground along the pile lines on a solar farm

12-Ton Excavator on a Solar Farm at Tanjung Langsat

Hitachi ZAXIS 120 trimming and levelling along the pile lines. Hard laterite ground, with gaps between installed piles too tight for a 20-ton machine.

Read the full project →
SEGAMAT, JOHOR40-ton excavator with a vibro hammer driving sheet piles under a railway viaduct

40-Ton Excavator on the EDT Railway at Segamat

Sheet piling and jacking pit excavation for a water main diversion under the railway viaduct. We dug the pit; the jacking contractor worked from it.

Read the full project →
Attachments

Rock Breaker, Ripper, Auger & Vibro Hammer

When ground conditions change mid-programme, you should not have to change supplier. All four attachments come fitted and operated.

Rock Breaker

Fitted to our 20-ton excavator for heavy breaking, or to the backhoe loader for lighter, tighter work. Rock Breaker Rental Johor Bahru

Ripper

For hard laterite and compacted ground that stops a standard bucket: keeps the programme moving instead of waiting on a specialist.

Auger

Mounted on the 40-ton excavator for pile and post boring on infrastructure and industrial sites.

Vibro Hammer

Excavator-mounted sheet pile driver, run on our 40-ton for shoring, cofferdams and jacking pits, including the railway water-main diversion at Segamat.

Coverage

Where We Deliver in Johor

These are not service areas on a map — they are sites our machines have actually worked on. See the full record on our machinery deployment projects page.

Iskandar PuteriData centre earthwork
Gelang PatahSite formation
MediniFully-manned deployment
SILCTrenching & piping
Sedenak Tech ParkData centre corridor
KulaiBackhoe earthwork
Senai Airport CityNight-shift clearing
Johor BahruSlope & drainage
SkudaiHead office
Pelabuhan Tanjung PelepasPile cap excavation
SegamatRail project jacking pit
Tanjung LangsatSolar farm earthwork
Why GCM

Why Contractors Rent From Us

13

Years on Johor Sites

Operating since 2013, with repeat clients across the Johor data centre corridor.

24H

Mobilisation

From confirmation to machine on site, including weekends when the programme demands it.

100%

Certified Operators

Every operator CIDB-registered, JPJ and NIOSH-licensed. No exceptions.

‘A’

Permit Compliant

Our lorry tippers run on a valid ‘A’ Permit with a DOSH record of zero non-conformity.

Need a 30-ton class? We do not own one, but we can source it through our supplier network. Just ask. See what our clients say on our customer reviews page.

Own a machine that is standing idle? We also run machines on behalf of their owners — operator, servicing and transport included. See idle machinery management.

FAQ

Machinery Rental FAQ

Is an operator included with the machine?
Yes. Every GCM machine is supplied fully manned with a CIDB-registered, JPJ and NIOSH-licensed operator. You are not renting bare equipment.
What is the minimum rental period?
Monthly rental starts from one month. Shorter jobs run on a daily rate, which is priced higher than the monthly equivalent. Tell us how long the work runs and we will quote the term that fits it.
Do you provide delivery and mobilisation?
Yes. We move machines to and from site on our own low loaders, and handle permits and escort arrangements where required. We mobilise within 24 hours of confirmation.
Which areas in Johor do you serve?
Johor Bahru, Iskandar Puteri, Gelang Patah, Medini, SILC, Sedenak Tech Park, Kulai, Senai, Skudai, Pelabuhan Tanjung Pelepas and Tanjung Langsat, plus the wider Johor region on request.
Do you work weekends and night shift?
Yes. We work weekends when the programme demands it, and we run night shifts where the site allows and the schedule has to be held.
Can you supply more than one machine to the same site?
Yes. We regularly run several machines on one site as a single team, for example an excavator loading our own lorry tippers, or two backhoe loaders working together, with our own low loaders moving them in.
Can we add a machine partway through the job?
Yes. Existing clients add machines mid-project regularly. Tell us what you need and when, and we will mobilise within 24 hours of confirmation, subject to availability.
What certification do your operators carry?
Every operator is CIDB-registered and JPJ and NIOSH-licensed. Some sites, such as TNB works, require NIOSH certification on site, and our operators already carry it.

More questions answered on our full machinery rental FAQ.

READY TO GET STARTED?

Get Your Free Machinery Quote Today

Contact us for a free consultation and quote. We’re here to help with your construction machinery needs.

For corporate accounts & tender enquiries, email us at inquiry@greencitymachinery.com

Scroll to Top