JOHOR BAHRU · ISKANDAR PUTERI · GELANG PATAH

Roller Compactor Rental in Johor Bahru

25 tCompaction Force
2.13 mDrum Width
2Vibration Settings

Fully Operated. CIDB-Certified. 24H Mobilisation.

✓13 Years On Johor Sites✓80+ Units in Fleet✓CIDB / JPJ / NIOSH Certified✓24H Mobilisation Guaranteed

Single Drum Vibratory Roller

What a 25-Ton Roller Compactor Is Built For

If you have a wide, open layer of fill or road base that has to reach density before the next layer goes on, this is the machine. A 25-ton single drum roller is the standard size for platforms, access roads and embankments on Johor sites, and it comes with our own operator.

SINGLE DRUM VIBRATORY ROLLER25 tcompaction force, 2.13 m drumVibrating drumRubber tyre driveSCHEMATIC, NOT TO SCALEDiagram of a single drum vibratory roller.

Hire the roller when the job looks like this

  • ✓Building platforms: compacting fill layer by layer for data centre, warehouse and factory platforms before the slab goes on.
  • ✓Road base and sub-base: crusher run and base course on new access roads, car parks and road upgrades.
  • ✓Embankments and bunds: bringing each lift of embankment fill to density before the next one is placed.
  • ✓Wide backfill after services: closing up after drainage, culvert or cable works where the area is wide enough for the drum.
  • ✓Substation and utility yards: compacted ground for switchyards, cable routes and equipment pads on power and telecom projects.
A single drum vibratory roller has one heavy steel drum in front that vibrates as it rolls, and rubber tyres at the back that drive it. Many sites call it a road roller or vibro roller. Ours is what most sites call a 25-ton roller: about 25 tonnes of compaction force at high amplitude, on a 2.13 m smooth drum. The machine itself weighs about 10.4 t, which is the number that matters for transport and access.
Specification

Roller Compactor Specification

The numbers that decide whether this roller suits your layer and your site.

1.8 / 0.9 mmHigh and low amplitude
2.26 mOverall width
38%Maximum gradient
Machine25-ton single drum vibratory roller (rated by compaction force), smooth steel drum
Operating weightabout 10.4 t, for transport and access planning
Drum width2,130 mm
VibrationTwo settings: high amplitude for thick fill, low amplitude for thin layers and work near structures
Centrifugal forceabout 25 t (250 kN) high · about 12.5 t (123 kN) low
Turning radius5.65 m outside
Supplied asFully operated: machine, our own operator and low-loader transport. Diesel is quoted separately

Figures are from the manufacturer’s published data for this machine class. How deep a layer compacts depends on the material, its moisture and the lift thickness, so tell us those before you set your layer thickness.

Will It Fit Your Site?

At 2.26 m across, the roller works inside a single road lane, so it can compact one lane of a road upgrade while the other stays open. Anything narrower than about 2.5 m, such as a trench, is not a roller job.

Typical road lane, 3.5 m Drum 2.13 m 2.89 m with ROPS 1.7 m person FRONT VIEW, 1 m = 60 px

Drawn to scale from the manufacturer’s dimension data.

Be Realistic

Where a 25-Ton Roller Is the Wrong Machine

A roller does one job, and it only does it well on the right material and the right width. Three cases where you should book something else:

Narrow trench backfill

The drum is 2.13 m wide and the machine is over 2.2 m across. Backfill in a trench or around a manhole narrower than that is a plate compactor or rammer job, not a roller job.

Wet, sticky clay

A smooth drum works best on sand, gravel, laterite, crusher run and road base. On wet clay it tends to seal the surface instead of compacting the layer. Let the material dry back, or talk to us before you book.

Finished asphalt

This is a soil and base-course roller. The asphalt wearing course is normally finished with a tandem roller by the paving contractor.

The honest rule: book the roller when you have a wide, open layer of granular fill or road base to bring up to density. Tell us the material, the layer thickness and the width of the area, and we will tell you straight whether this is the right machine, including when it is not.
Documentation

Our Own Machines, Start to Finish

On a data centre or infrastructure site the machine does not get through the gate, the paperwork does. Here is what comes with the unit.

Our own machine, our own fleet

Every machine we send out is our own: booking, operator, servicing and anything that comes up on site. One company, one number to call

Insured

Mobile plant & equipment policy, current, covering the machine on site and in transit

Serviced monthly

Signed service, maintenance and inspection sheet: engine oil, hydraulics, coolant, greasing, leak check, drum and vibration system, tyres and brakes

CIDB-registered operator

Registered with CIDB and briefed for your site before day one. A 25-ton vibrating drum beside installed services is not a job for an untrained seat

We hand you the submission pack. Ownership grant, insurance, three months of service history, operator registration and competency certificate, and the machine dimension sheet, compiled for main-contractor submission before the machine moves in, so your safety officer is not chasing us on day one.
Our single drum vibratory roller on a Johor earthwork site

Need the Ground Dug, Hauled and Compacted?

Contact us with your site location and scope of work.
We supply the excavator, the tippers and the roller from one fleet. One call covers the whole job.

GCM long arm excavator with operator in full PPE on a drainage job in Johor Bahru

Why Contractors in Johor Bahru Choose Green City Machinery

🕐 24-Hour Mobilisation
Confirm today and we put machine and operator on site within 24 hours, across Johor Bahru and surrounding districts.

🏅 100% Certified Operators
Every operator is CIDB-registered, JPJ and NIOSH-licensed. PPE-compliant and experienced on active construction sites.

📦 One Call, One Supplier
Machine, operator and transport, all in one rental. No chasing separate contractors or managing multiple vendors.

📅 13 Years of Project Experience
Since 2013, supporting earthwork, infrastructure and data centre projects across Johor Bahru, Iskandar Puteri and Gelang Patah.

Years On Site
0 +
Units in Fleet
0 +
Projects Completed
0 +
Mobilisation Guaranteed
0 H

What Contractors Say About GCM

⭐⭐⭐⭐⭐

“Very good experience with Green City Machinery Sdn Bhd. Rented excavator for an External Infra C&S Works, reliable machines and operator. Rented Long-arm and Short-arm excavator for our works. Recommended. All operators come with CIDB certificates.”

— Nick Liow · External infra C&S works · Google Review

⭐⭐⭐⭐⭐

“We engaged Green City Machinery Sdn Bhd (GCM) to provide Hitachi excavator and backhoe loader rental services for our data center development project in Iskandar Puteri. The machines were reliable and well maintained, and the operators demonstrated good site awareness and compliance with project requirements.”

— Loi Cia Yi · Data centre project · Iskandar Puteri · Google Review

Frequently Asked Questions: Roller Compactor Rental in Johor Bahru

Yes. Every rental is fully operated, with our own CIDB-registered operator included as standard.

A 25-ton single drum vibratory roller: about 25 tonnes of compaction force at high amplitude, a 2.13 m smooth steel drum and two vibration settings. The machine itself weighs about 10.4 t. It is the standard size for platform, road base and embankment compaction on Johor sites.

On most Malaysian sites, yes. Roller compactor, road roller, vibro roller and vibratory roller all refer to the same kind of machine. Ours is the single drum type: a vibrating steel drum in front and rubber tyres driving at the back.

Yes. We run excavators, backhoes, lorry tippers and the roller from one fleet, so cut, haul, place and compact can be booked with one company and one contact.

Recent jobs include a 275kV switching station in Kempas, where the roller followed our excavators through backfill, and the Johor Elephant Sanctuary in Kota Tinggi, compacting platforms, access roads and parking areas.

Within 24 hours of confirmed booking. Our base in Skudai covers Johor Bahru, Iskandar Puteri, Gelang Patah and surrounding areas with fast turnaround.

We quote by the month for project work, and by the day or week for short scopes. Tell us the site and the duration and we will price it the way that suits the job, machine, operator and low-loader transport quoted together.

Johor Bahru, Iskandar Puteri, Gelang Patah, Skudai, Kulai, Senai, Nusajaya, Pasir Gudang and surrounding Johor areas. Nationwide projects on request.

Get a Same-Day Quote for
Roller Compactor Rental in Johor Bahru

Tell us your site location, machine type needed and start date.
We’ll confirm availability and send a quote. Same day.

WE MOBILISE. YOU BUILD.

Scroll to Top